Arduino ten led flash using potentiometer project 2

 Arduino Ten LED Flash using Potentiometer Project 2

Arduino Uno - 01

Breadboard - 01

330 Ohm Resistors - 10

LED - 10

10K Potentiometer - 01

Jumper wires

Arduino Sketch

int delay1;                                         // Define the variable

void setup()                                       // Function in called when sketch start

{

  for(int i = 0; i<= 9; i++)                 // variable "i" start is pin 0,"i" max to pin 9 

  {

    pinMode(i,OUTPUT);                // Variable in an Output

  }

}

void loop()                                        // Continuously run program

{

  delay1 = analogRead(A0);           // Read voltage at Analog pin 0

  {

    for(int i = 0; i<= 9; i++)

    {

      digitalWrite(i,HIGH);              // variables pin On(HIGH)

      delay(delay1);                           // Read voltage at Analog pin 0

      digitalWrite(i,LOW);              // Variables pin Off(LOW)

    }

  }

}