Ten led flashing 1

Ten LED flashing project 1

Arduino Uno - 01

Breadboard - 01

330 Ohm Resistors - 10

LED - 10

Jumper Wires

Arduino Sketch 1

int LED1 = 0;                              //creates a variable integer called 'LED1'
int LED2 = 1;                              //creates a variable integer called 'LED2' 

int LED3 = 2;                                  
int LED4 = 3;
int LED5 = 4;
int LED6 = 5;
int LED7 = 6;
int LED8 = 7;
int LED9 = 8;
int LED10 = 9;
void setup()                                           // Function is called when sketch start
{
  pinMode(LED1, OUTPUT);                  // Variable is an output
  pinMode(LED2, OUTPUT);                  // Variable is an output
  pinMode(LED3, OUTPUT);
  pinMode(LED4, OUTPUT);
  pinMode(LED5, OUTPUT);
  pinMode(LED6, OUTPUT);
  pinMode(LED7, OUTPUT);
  pinMode(LED8, OUTPUT);
  pinMode(LED9, OUTPUT);
  pinMode(LED10, OUTPUT);
  }
void loop()                                               // continuously run program
{
  digitalWrite(LED1, HIGH);                    // Pin no 0 LED ON
  delay(100);                                           // Wait for 100 millisecond(s)
  digitalWrite(LED1, LOW);                    // Pin no 0 LED OFF
  delay(50);                                             // Wait for 50 millisecond(s)
  digitalWrite(LED2, HIGH);                   // Pin no 1 LED ON
  delay(100);                                          // Wait for 100 millisecond(s)
  digitalWrite(LED2, LOW);                   // Pin no 1 LED OFF
  delay(50);                                       
  digitalWrite(LED3, HIGH);
  delay(100);                                     
  digitalWrite(LED3, LOW);
  delay(50);                                       
  digitalWrite(LED4, HIGH);
  delay(100);                                       
  digitalWrite(LED4, LOW);
  delay(50);                                           
  digitalWrite(LED5, HIGH);
  delay(100);                                          
  digitalWrite(LED5, LOW);
  delay(50);                                               
  digitalWrite(LED6, HIGH);
  delay(100);
  digitalWrite(LED6, LOW);
  delay(50); 
  digitalWrite(LED7, HIGH);
  delay(100); 
  digitalWrite(LED7, LOW);
  delay(50); 
  digitalWrite(LED8, HIGH);
  delay(100);
  digitalWrite(LED8, LOW);
  delay(50); 
  digitalWrite(LED9, HIGH);
  delay(100); 
  digitalWrite(LED9, LOW);
  delay(50); 
  digitalWrite(LED10, HIGH);
  delay(100); 
  digitalWrite(LED10, LOW);
  delay(50); 
  digitalWrite(LED10, HIGH);
  delay(100);
  digitalWrite(LED10, LOW);
  delay(50); 
  digitalWrite(LED9, HIGH);
  delay(100); 
  digitalWrite(LED9, LOW);
  delay(50); 
  digitalWrite(LED8, HIGH);
  delay(100); 
  digitalWrite(LED8, LOW);
  delay(50); 
  digitalWrite(LED7, HIGH);
  delay(100); 
  digitalWrite(LED7, LOW);
  delay(50); 
  digitalWrite(LED6, HIGH);
  delay(100); 
  digitalWrite(LED6, LOW);
  delay(50); 
  digitalWrite(LED5, HIGH);
  delay(100);
  digitalWrite(LED5, LOW);
  delay(50); 
  digitalWrite(LED4, HIGH);
  delay(100); 
  digitalWrite(LED4, LOW);
  delay(50); 
  digitalWrite(LED3, HIGH);
  delay(100); 
  digitalWrite(LED3, LOW);
  delay(50); 
  digitalWrite(LED2, HIGH);
  delay(100); 
  digitalWrite(LED2, LOW);
  delay(50); 
  }